The Accumulating Friction Roll Conveyor is the conveyor for your needs if accumulation for maximum part density is your requirement. Hardened oil impregnated rollers will allow you to transfer your part or part pallets directly on the roller. Using an inner driving roller and an outer slipping roller (which simply stalls under the part) allows parts to accumulate without damage to the conveying surface of the part. Typical problems found in transferring rough or finished parts can be eliminated with the use of an eccentric roller. This conveyor comes with a variety of styles such as straight sections, curves, powered carts, swing gates, turntables and removable in-line sections.
Available Features
- Construction:
- Steel Legs
- Aluminum Side Bars
- Conveyor Drive:
- Escapements:
- Part Types:
- Cylinder Blocks, Cylinder Heads, or any Flat Part or Pallet
- Conveyor Length:
Can be designed to any length
- Conveyor Speed:
- 150 mm (6 inches) per second. Other speeds available upon request
- Controls:
- P.L.C. or your preference
- Accessory Equipment:
- Orientation Devices, Rotate Stations, Pushers, Pullers, Shot Pins, Curve Sections, Turntables, Rollovers, Swing Gates
